⎝⎛叫我棋牌⎞⎠

LA-5816A Outdoor 5.8G 866Mbps Industrial Wireless Bridge

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

Product introduction

LA-5816A is an outdoor industrial-grade, high-power, high-bandwidth, long-range wireless bridge. Using AR9344 ac wireless solution, the hardware and software are very stable, the signal receiving sensitivity is high, the performance is stable, and the transmission rate is high. The LA-5816A has a transmit power of up to 30dBm, and the system integrates a 16dbi dual-polarized MMO antenna (17 ° horizontal and 17 ° vertical). The wireless signal modulation uses MIMO modulation technology, the highest rate is 866Mbps, the point-to-point signal transmission is 5km and the net bandwidth is 200M +. The software comes with a frequency detection function, which can detect 5G channel interference on the spot, use a lower interference communication channel, and improve the spectrum utilization And communication efficiency to ensure stable signal transmission. The operating system supports Chinese and English interfaces, and the operation is simple, convenient and easy to install, reducing the requirements for installation and debugging.


Features and advantages

LA-5816A adopts the 802.11ac transmission protocol, which supports the 802.11an protocol downwards, and supports a maximum transmission rate of 866Mbps, which can meet the transmission of video, voice, data, control signals, and multimedia information services based on the TCP / IP protocol.

★ Integrated antenna, easy installation

★ Easy deployment and flexible networking

★ Can expand fast roaming switching mechanism

★ Support AP, client mode, point-to-point or point-to-multipoint bridging working modes, flexible to use

★ The transmit power is adjustable, the transmit power is 30dBm, in steps of 1dBm

★ High receiving sensitivity, compared to other devices at the same distance can get better data flow

★ Intelligent load balancing to maximize wireless network capacity

★ Carrier-grade high reliability and stability

★ The channel bandwidth is available, the frequency resource is effectively used, the wireless link is optimized, and the network transmission is more stable

★ On-site spectrum scanning soft adjustment: It can scan the entire 5GHz frequency band and give signal strength, specific frequency points, and channels, which is convenient for project debugging

★ Bandwidth management: Bandwidth control is in units of 1k, with perfect QoS service quality guarantee

★ Antenna calibration: WEB interface automatically displays the receiving level value, which is convenient for project construction and testing

★ Multiple security measures: support WEP, WPA, WAP2 and 802.1x, and support international standards AES / TKIP

★ Automatic channel scanning, can automatically detect the signal interference level of the local 5.8G channel, and obtain clean frequency resources

★ Industrialized design of equipment, more stable, more prominent performance

★ Channel interference detection, which can scan the entire 5.8GHz frequency band, which is convenient for project debugging

★ Signal strength indication, convenient antenna calibration, improve installation and debugging speed, shorten construction time

★ Power over Ethernet, eliminating the problem of power supply, facilitating flexible layout of equipment and reducing construction volume

Convenient configuration and simple operation of management equipment

★ Built-in watchdog function to prevent crashes permanently

★ Timed restart function of equipment hardware to ensure long-term stable operation of equipment

★ Telecom-grade design standards, waterproof, dust-proof, UV-resistant, wide temperature design to meet a variety of harsh outdoor environments

★ The system supports Chinese and English operation, reducing the difficulty of debugging


Third, the technical specifications

system message

processor

AR9344 wireless solution

frequency

5.180 ~ 5.9GHz

RAM

128MB

Flash memory

16MB

Transmit power

30dbm

Modulation

OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

interface

One 1000BASE-TX adaptive fast Ethernet interface, auto flip (Auto MDI / MDIX)

Antenna gain

16dbi

Antenna angle

H (horizontal): 17 °
V (vertical): 17 °

Front-to-back ratio

≥25

Standing wave ratio

≤1.5

Radio frequency band

Support HT20, HT40, HT80MHz

Sensitivity

-75 to -95dBm (varies by modulation method)

Encryption type

WEP, WPA, WPA-TKIP, WPA-AES, WPA2, WPA2-TKIP, WPA2-AES, 802.1x

Safety management

ACL access control policy

Management style

Web management, support SNMP V2C, Telnet / Shell (SSH)

Machine power consumption

10W

Power supply

DC18 ~ 24V POE forced power supply

Total Weight

2.1 kg

Suitable for humidity

Jobs: 5% to 95% (non-condensing)

Storage: Max.90% (non-condensing)

Operation interface

Support Chinese / English

Temperature conditions

Working: -30 ℃ to 70 ℃

Storage: -40 ° C to 90 ° C

Size (length * width * height)

233 * 233 * 50 mm


龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台