⎝⎛叫我棋牌⎞⎠

LA-5810N-K 300M Industrial Wireless Bridge

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

是一款非常灵活的网桥 , 设备根据项目实际需要可搭配置 5.8G 300Mbps速率 ,射频功率26dbm。 LA-5810N-K is a very flexible network bridge . The equipment can be configured with a 5.8G 300Mbps rate and an RF power of 26dbm according to the actual needs of the project . According to different transmission distances and scenarios, the use of antennas with different gains and angles can achieve signal bridging or coverage between 1 to 10 kilometers. 比传统网桥更高,满足网络高清视频监控组网带宽要求。 The system adopts industrial-grade design, with higher processing speed and effective bandwidth than traditional bridges, and meets the bandwidth requirements of network HD video surveillance networking. After years of practical installation and application in the industry, the equipment performance is stable and reliable. Suitable for applications in mining areas, operator network communications, financial systems, forest fire prevention, road monitoring, ports and terminals, oil fields, factories, ecological farming, safe cities, snowy projects, bayonet monitoring, border security, island monitoring, etc.



Backward compatible 802.11a , Upward compatible with 802.11n, 5.8GHz working frequency band, providing high-speed bandwidth of up to 300Mbps, meeting the transmission of video, voice, data, control signals and multimedia information services based on TCP / IP protocol.

★ Integrated antenna, easy installation

★ Easy deployment and flexible networking

★ Fast roaming switching mechanism

★ Support AP, client mode, point-to-point or point-to-multipoint bridging working modes, flexible to use

★ The transmit power is adjustable, the transmit power is 26dBm, in steps of 1dBm

★ High receiving sensitivity, compared to other devices at the same distance can get better data flow

★ Intelligent load balancing to maximize wireless network capacity

★ Carrier-grade high reliability and stability

★ Adjustable channel bandwidth, effectively use frequency resources, optimize wireless links, and make network transmission more stable

★ On-site spectrum scanning software: It can scan the entire 5GHz frequency band, and give signal strength, specific frequency points, and channels, which is convenient for project debugging

★ IP tool software: When you forget the wireless device IP address, you can use (IP Config) tool software to search the device's IP address

★ Bandwidth management: Bandwidth control is in units of 1k, with perfect QoS service quality guarantee

★ Antenna calibration: WEB interface automatically displays the receiving level value, which is convenient for project construction and testing

★ Multiple security measures: support WEP, WPA, WAP2 and 802.1x, and support international standards AES / TKIP

★ Automatic channel scanning, can automatically detect local 5.8G Channel signal interference to obtain clean frequency resources

★ Industrialized design of equipment, more stable, more prominent performance

★ Channel interference detection, which can scan the entire 5.8GHz frequency band, which is convenient for project debugging

★ Signal strength indication, convenient antenna calibration, improve installation and debugging speed, shorten construction time

★ Ethernet POE power supply, eliminating the problem of power supply, facilitating flexible layout of equipment and reducing construction volume

Convenient configuration and simple operation of management equipment

★ Built-in watchdog function to prevent crashes permanently

★ Timed restart function of equipment hardware to ensure long-term stable operation of equipment

★ Telecom-grade design standards, waterproof, dust-proof, UV-resistant, wide temperature design to meet a variety of harsh outdoor environments

★ The system supports Chinese and English operation, reducing the difficulty of debugging




RF hardware
Frequency Range 5.15 ~ 5.35 GHz
5.47 ~ 5.725 GHz
5.725 ~ 5.825 GHz
RAM 64MB
Flash memory 8MB
Transmit power 26dbm
Power consumption 5.5W
RF technology OFDM
Modulation IEEE 802.11a / n: OFDM with BPSK, QPSK, 16QAM, 64QAM
interface 10 / 100Base-Tx RJ45 (100M Ethernet port)
Operating mode Wireless access point / wireless client / bridge / relay
Transmission rate MCS 0 – MCS 7 (15/30/45/60/90/120/135 / 150Mbps)
MCS 8 – MSD 15 (30/60/90/120/180/240/270 / 300Mbps)
Sensitivity IEEE 802.11a: -96dBm @ 6Mbps; -83dBm @ 54Mbps
IEEE 802.11n: -95dBm @ HT20; -91dBm @ HT40
Radio frequency band Support HT20, HT40MHz
Sensitivity -75dBm @ 300Mbps, -79dBm @ 270Mbps, -81dBm @ 240Mbps, -85dBm @ 180Mbps, -89dBm @ 120Mbps, -90dBm @ 90Mbps, -93dBm @ 60Mbps, -95dBm @ 30Mbps
Encryption type 64-bit / 128-bit / 152-bit WEP and WPA (-PSK with TKIP / AES)
Management style Web management, support SNMP V2C, Telnet / Shell (SSH)
Upgrade backup Support remote online firmware upgrade
antenna Optional
Antenna type External
Front-to-back ratio ≥25
Standing wave ratio ≤1.5
Power supply DC 18 ~ 24V POE power supply
Network Interface One 10 / 100BASE-TX adaptive fast Ethernet interface, auto flip (Auto MDI / MDIX)
Shell size 220 × 220 × 80 mm
weight 1.8Kg
Installation and fixing U-shaped clamp pole, pole diameter: Ф30-50mm
Operating temperature Working temperature: -30 ℃ to 70 ℃
Storage temperature: -40 ° C to 90 ° C
Working humidity Operating humidity: 5% to 95% non-condensing
Storage humidity: up to 90% non-condensing



Driving school wireless video surveillance system transmission diagram:




Product search keywords: wireless bridge, wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless video monitoring equipment, wireless image transmission equipment, wireless video transmission equipment


龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台