⎝⎛叫我棋牌⎞⎠

LA-5825A 866Mbps Outdoor Industrial Wireless Bridge

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

LA-5825A is an outdoor industrial-grade, high-power, high-bandwidth, long-distance wireless bridge. Using AR9344 + AR9882 ac wireless solution, the hardware and software are very stable, the signal receiving sensitivity is high, the performance is stable, and the transmission rate is high. LA-5825A has a transmit power of up to 30dBm (1W), and the system integrates a 25dbi dual-polarized MMO antenna (horizontal 9 °, vertical 9 °). The signal modulation uses MIMO technology, the highest rate is 866Mbps, the signal point-to-point is up to 20 kilometers, the point-to-multipoint signal transmission is 15 kilometers, and the 10-km point-to-point transmission bandwidth is 200Mbps +. The system comes with a frequency detection function, which can detect the 5G signal and intensity in the field, optimize the spectrum, increase the spectrum utilization rate, and ensure the stable signal transmission. The system operation supports Chinese and English interface, the operation is simple, convenient and easy to install, reducing the requirements for installation and commissioning.



         LA-5825A adopts the 802.11ac transmission protocol, supports the 802.11an protocol downwards, and supports a maximum transmission rate of 866Mbps, which can meet the transmission of video, voice, data, control signals and multimedia information services based on the TCP / IP protocol.  

★ Integrated antenna, easy installation

★ Easy deployment and flexible networking

★ Fast roaming switching mechanism

★ Support AP, client mode, point-to-point or point-to-multipoint bridging working modes, flexible to use

★ The transmit power is adjustable, the transmit power is 30dBm (1W), in steps of 1dBm

★ High receiving sensitivity, compared to other devices at the same distance can get better data flow

★ Intelligent load balancing to maximize wireless network capacity

★ Carrier-grade high reliability and stability

★ The channel bandwidth is available, the frequency resource is effectively used, the wireless link is optimized, and the network transmission is more stable

★ On-site spectrum scanning soft adjustment: It can scan the entire 5GHz frequency band and give signal strength, specific frequency points, and channels, which is convenient for project debugging

★ IP tool software: When you forget the wireless device IP address, you can use (IP Config) tool software to search the device's IP address

★ Bandwidth management: Bandwidth control is in units of 1k, with perfect QoS service quality guarantee

★ Antenna calibration: WEB interface automatically displays the receiving level value, which is convenient for project construction and testing

★ Multiple security measures: support WEP, WPA, WAP2 and 802.1x, and support international standards AES / TKIP

★ Automatic channel scanning, can automatically detect the signal interference level of the local 5.8G channel, and obtain clean frequency resources

★ Industrialized design of equipment, more stable, more prominent performance

★ Channel interference detection, which can scan the entire 5.8GHz frequency band, which is convenient for project debugging

★ Signal strength indication, convenient antenna calibration, improve installation and debugging speed, shorten construction time

★ Power over Ethernet, eliminating the problem of power supply, facilitating flexible layout of equipment and reducing construction volume

Convenient configuration and simple operation of management equipment

★ Built-in watchdog function to prevent crashes permanently

★ Timed restart function of equipment hardware to ensure long-term stable operation of equipment

★ Telecom-grade design standards, waterproof, dust-proof, UV-resistant, wide temperature design to meet a variety of harsh outdoor environments

★ The system supports Chinese and English operation, reducing the difficulty of debugging





system message

processor

AR9344 + AR9882 wireless solution

frequency

5.180 ~ 5.9GHz

RAM

128MB

Flash memory

16MB

Transmit power

2dBm 30dbm (± 2dBm )

Modulation

OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

interface

One 1000BASE-TX adaptive fast Ethernet interface, auto flip (Auto MDI / MDIX)

Antenna gain

25dbi

Antenna angle

(水平):9° H (horizontal): 9 °
(垂直): V (vertical): 9 °

Front-to-back ratio

≥25

Standing wave ratio

≤1.5

Radio frequency band

HT20 HT40 HT80MHz Supports HT20 , HT40 , HT80MHz

Sensitivity

HT20 (bandwidth): MCS0 @ -94dbm

HT20 (bandwidth): MCS7 @ -77dbm

):MCS0@-93dbm HT40 ( bandwidth ): MCS0 @ -93dbm

HT40 (bandwidth): MCS7 @ -75dbm

Encryption type

WPA WPA-TKIP WPA-AES WPA2 WPA2-TKIP WPA2-AES 802.1x WEP , WPA , WPA-TKIP , WPA-AES , WPA2 , WPA2-TKIP , WPA2-AES , 802.1x

Safety management

访问控制策略 ACL access control policy

Management style

方式管理,支持SNMP V2C,Telnet/Shell(SSH) Web management, support SNMP V2C, Telnet / Shell (SSH)

Machine power consumption

9.5W

Power supply

POE DC 18 ~ 24V wide voltage

Total Weight

2.6 kg

Suitable for humidity

Jobs: 5% to 95% (non-condensing)

Storage: Max.90% (non-condensing)

Operation interface

Support Chinese / English

Temperature conditions

Work: 30oC to 70oC

Storage: -40oC to 90oC

Size (length * width * height)

370 * 370 * 100 mm






Product search keywords: wireless bridge, 15 km wireless bridge, 5.8G wireless bridge, long-range wireless bridge, wireless farm monitoring, wireless monitoring system for power plants


龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台