⎝⎛叫我棋牌⎞⎠

LA-5839S outdoor antenna integrated wireless bridge (5 km)

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

LA-5839S is an outdoor wireless bridge that solves wireless access within the last 1 ~ 5 kilometers. It uses the latest AR9342 processor, which has stable operation and high reliability, ensuring stable operation in high or low temperature environments. The dual-channel RF output is 26dbm (400MW). The LA-5839S system integrates a 5.8G, 18dbi dual-polarized antenna. The point-to-point transmission distance is 5 kilometers, and the point-to-multipoint transmission distance is 3 kilometers. The bidirectional rate can reach about 100M. Lower cost and higher efficiency than traditional fiber laying. LA-5839S has a built-in frequency detection function. Through the built-in software analysis function, it can detect the channel usage and intensity of the 5G signal equipment in the field, optimize the spectrum and improve the efficiency of spectrum use. The system has a watchdog function to prevent crashes. The system is set through IE and supports Chinese / English operation, which is convenient for engineers to debug. It can complete the connection between the devices, shorten the debugging time and work difficulty, and improve work efficiency.



Backward compatible 802.11a , Upward compatible with 802.11n, 5.8GHz working frequency band, providing high-speed bandwidth of up to 300Mbps, meeting the transmission of video, voice, data, control signals and multimedia information services based on TCP / IP protocol.

★ Integrated antenna, easy installation

★ Easy deployment and flexible networking

★ Fast roaming switching mechanism

★ Support AP, client mode, point-to-point or point-to-multipoint bridging working modes, flexible to use

★ The transmit power is adjustable, the transmit power is 26dBm (400MW), in steps of 1dBm

★ High receiving sensitivity, compared to other devices at the same distance can get better data flow

★ Intelligent load balancing to maximize wireless network capacity

★ Carrier-grade high reliability and stability

★ Adjustable channel bandwidth, effectively use frequency resources, optimize wireless links, and make network transmission more stable

★ On-site spectrum scanning software: It can scan the entire 5GHz frequency band, and give signal strength, specific frequency points, and channels, which is convenient for project debugging

★ IP tool software: When you forget the wireless device IP address, you can use (IP Config) tool software to search the device's IP address

★ Bandwidth management: Bandwidth control is in units of 1k, with perfect QoS service quality guarantee

★ Antenna calibration: WEB interface automatically displays the receiving level value, which is convenient for project construction and testing

★ Multiple security measures: support WEP, WPA, WAP2 and 802.1x, and support international standards AES / TKIP

★ Automatic channel scanning, can automatically detect local 5.8G Channel signal interference to obtain clean frequency resources

★ Industrialized design of equipment, more stable, more prominent performance

★ Channel interference detection, which can scan the entire 5.8GHz frequency band, which is convenient for project debugging

★ Signal strength indication, convenient antenna calibration, improve installation and debugging speed, shorten construction time

★ Power over Ethernet, eliminating the problem of power supply, facilitating flexible layout of equipment and reducing construction volume

Convenient configuration and simple operation of management equipment

★ Built-in watchdog function to prevent crashes permanently

★ Timed restart function of equipment hardware to ensure long-term stable operation of equipment

★ Telecom-grade design standards, waterproof, dust-proof, UV-resistant, wide temperature design to meet a variety of harsh outdoor environments

★ The system supports Chinese and English operation, reducing the difficulty of debugging



Working frequency 4.9 ~ 6.1GHz (super channel)
RAM 64MB
Flash memory 8MB
Modulation OFDM: BPSK, QPSK, 16-QAM, 64-QAM
Operating mode Wireless access point / wireless client / bridge / relay
Supported rate 11a rate: 6, 9, 12, 18, 24, 36, 48, 54 Mbps;
11n rate: MCS0-15, MCS1-30, MCS2-45, MCS3-60, MCS4-90, MCS5-120, MCS6-135, MCS7-150, MCS8-30, MCS9-60, MCS10-90, MCS11-120 , MCS12-180, MCS13-240, MCS14-270, MCS15-300
Band scanning Support site scanning and channel detection
RF power 26dBm (adjustable)
Radio frequency band Support HT20, HT40MHz
Sensitivity -75dBm @ 300Mbps, -79dBm @ 270Mbps, -81dBm @ 240Mbps, -85dBm @ 180Mbps, -89dBm @ 120Mbps, -90dBm @ 90Mbps, -93dBm @ 60Mbps, -95dBm @ 30Mbps
Encryption type WEP, WPA, WPA-TKIP, WPA-AES, WPA2, WPA2-TKIP, WPA2-AES, 802.1x
Safety management ACL access control policy
Management style Web management, support SNMP V2C, Telnet / Shell (SSH)
Upgrade backup Support remote online firmware upgrade
Antenna gain 18dBi
Antenna type Directional antenna
Polarization mode H / V horizontal / vertical (H: 16 °, V: 16 °)
Front-to-back ratio ≥25
Standing wave ratio ≤1.5
Network Interface One 10 / 100BASE-TX adaptive fast Ethernet interface, auto flip (Auto MDI / MDIX)
Power supply POE DC 18 ~ 24V wide voltage (type 6 network cable 30 meters)
Power consumption 6W
Shell size 270 * 270 * 70 mm
weight 1.8Kg
Operating temperature Operating temperature: -40 ° C to 70 ° C
Storage temperature: -60 ° C to 90 ° C
Working humidity Operating humidity: 5% to 95% non-condensing
Storage humidity: up to 90% non-condensing





Product search keywords: wireless bridge, 5km wireless bridge, 5.8G wireless bridge, 300M wireless bridge, island wireless monitoring, wireless monitoring system in mining area


龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台