⎝⎛叫我棋牌⎞⎠

LA-5810G Gigabit Industrial Wireless Bridge

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

Product introduction

The LA-5810G wireless system is designed for dual-frequency transmission, with a maximum air speed of 1750Mbps (1300Mbps @ 5.8G + 450Mbps @ 2.4G) to meet the requirements of high-bandwidth backbone transmission and wireless network coverage. Both bands are designed with 3 * 3 antenna architecture, of which 5.8G is used for long-distance high-bandwidth wireless backbone network transmission, and 2.4G is used for wireless coverage. LA-5810G 5G single-channel radio frequency is up to 27dbm, and the maximum output power of three-channel numbers is 32dbm. When used with a high-gain directional antenna, the effective transmission distance is 50KM. With the device's own 450Mbps@2.4G wireless coverage function, it can simultaneously achieve local wireless coverage, access and other business requirements. The LA-5810G wireless networking can implement two modes: point-to-point (PTP) and point-to-multipoint (PTMP), which can connect LAN data distributed in different areas. It is widely used in factories, mines, forest fire prevention, road monitoring, ports, docks, oil fields, large factories, ecological farming, safe city monitoring, banking, government, transportation, etc. And other high-bandwidth service demand scenarios. Realize industrial-grade wireless base stations with high performance, high bandwidth and multi-functional platform


Product features and advantages

● Excellent performance: It complies with IEEE 802.11a / c standards, and adopts MIMO and OFDM technologies;
● Flexible networking: support wireless access point / wireless client / bridge / relay;
● High receiving sensitivity and better data flow at the same distance ● Network management: remote management based on WEB or centralized management by SNMP;
● Channel bandwidth: The software can control the bandwidth of each channel by 20/40 / 80Mh.

● Antenna calibration: WEB interface automatically displays the receiving level value, which is convenient for project construction and testing;

● Bandwidth management: Bandwidth control is in units of 1M, with perfect QoS service quality guarantee;

● Ultra-high transmission rate: meet long-distance standard definition, high-definition network video signals, network data transmission

● Bandwidth test: Provides bandwidth test for sending and receiving, no third-party test software is required, which facilitates engineering installation and commissioning;

● Multiple security measures: support WEP, WPA, WAP2 and 802.1x, and support AES / TKIP of international standards;

● On-site spectrum scanning software: it can scan the entire 5.8GHz frequency band and give signal strength, specific frequency points, and channels, which is convenient for project debugging;
● IP tool software: When you forget the wireless device IP address, you can use (uconfig) tool software to search for the device's IP address;
● Chinese and English web management, support Telnet at the same time, monitoring and management is more convenient; support configuration file import / export and software upgrade;

Third, the technical indicators

model

LA-5810G


Hardware specifications

Chip Solution

Qualcomm Atheros QCA9563 775MHz + QCA9880


RAM

128MB


Flash memory

32MB


Wireless characteristics

Working band

2.412 ~ 2.484GHz@5.180 ~ 5.875 GHz


Modulation mode

OFDM / MIMO


Operating mode

Cover AP / Bridge Bridge / Repeater Repeater / Bridge + WDS


Level state

Real-time display of receiving level status / antenna calibration


Band scan

Site scan and channel detection


antenna

3 5GN antenna ports, 3 2.4GN antenna ports


DFS

Dynamic frequency selection, can detect and avoid military radar channels (can be set in different countries)


RF characteristics

RF power

and 32dBm@5.8GHz 23dBm@2.4GHz and 32dBm@5.8GHz


Band bandwidth

HT20 / 40 / 80MHz


Safety features

Encryption mode

WEP / WPA / WPA2 / 802.1x


Layer 2 isolation

SSID can be hidden


ACL control

ACL access control policy


Network management

Network nature

DHCP Server / DHCP Clinet / Net, etc.


QOS management

Support WMM (Wireless Multimedia)


Status Display

ARP, Bridge, route, throughput table


Auto restart

How many hours or specified time can be restarted to achieve equipment protection and fault recovery


Watchdog function

Automatically power off and restart the device according to a predetermined time point or time period


Management style

WEB, SNMP, TELNET, SSH


Upgrade backup

Support F / W WEB, TFTP, FTP upgrade and backup


Electrical characteristics

Power supply

POE power supply (standard)

IEEE 802.3af, IEEE 802.3at


DC power supply (customized)

DC 24 ~ 48V 2A (2 core aviation head)


Power consumption

20W (full load)


Network Interface

1 10/100 / 1000M Ethernet port, support MDI / MDIX adaptive and Power over Ethernet function


Physical characteristics

size

310x290x80mm


weight

3.5 kg (including packaging)


material

ABS material


Installation and fixing

U-shaped clamp pole, pole diameter: Ф30-50mm


Environmental characteristics

temperature

Working temperature: -30 ℃ to 70 ℃
Storage temperature: -60 ° C to 90 ° C


humidity

Operating humidity: 5% to 95% non-condensing
Storage humidity: up to 90% non-condensing


Working humidity


Operating humidity: 5% to 95% non-condensing
Storage humidity: up to 90% non-condensing



龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台