⎝⎛叫我棋牌⎞⎠

LA-850V1 Portable Fast Switching Wireless Data Transmission Terminal

Main Products: wireless monitoring, wireless monitoring equipment, wireless video transmission, wireless monitoring system, wireless video monitoring

product description:

LA-850 series wireless transmission equipment has the function of fast communication with various fixed base stations during fast movement to realize high-bandwidth data backhaul communication, and built-in high-performance wireless RF unit. Widely used in cruise ship, tunnel inspection, inspection, robot communication, rail transit, railway, driving school subject two, subject three, unmanned driving, etc. Real-time online communication between the mobile terminal and the back end of the center is required during the movement process, and In the application scenario of fast switching of multiple wireless base stations, it has multiple fast switching mechanisms such as roaming signal strength thresholds and background scanning modes, which can provide high-bandwidth, low-latency data roaming services in high-speed mobile environments.

LA-850 is divided into two parts. LA-850V1 is a handheld or portable mobile terminal wireless communication device. It supports hand-held or fixed on small mobile devices. The terminal device can be used with different specifications of orientation or according to the needs of wireless monitoring. Omnidirectional antenna. LA-850V2 is a fixed access base station, which is installed on the line during the movement of terminal equipment to communicate with the terminal. It can be used with different specifications of directional or omnidirectional antennas according to different needs.

  Main features :

ATHEROS AR 9344 l ATHEROS : AR 9344

l        64 MB Memory: 64 MB
Flash: 16 MB l Flash: 16 MB

l        1个10 / 100 / 太网端口 RJ Supports one 10/100 / Ethernet port , RJ 45

l        看 门 Hardware watchdog

l        Support serial port (TTL level) control function, which is convenient for MCU, PLC or embedded industrial control motherboard to control the function configuration of wireless base station through serial port. For example, modify the base station's operating mode, operating frequency, MAC access whitelist, blacklist access, etc.

l         Supports vehicle-mounted terminals to quickly switch and roam in multiple wireless base stations without the need for core device management in the network. The average switching time is less than 200ms.

l         2 N-head antenna interfaces, external MIMO antenna, theoretical air rate of 300MBPS, measured in both directions up to 120MBPS.

l         Compliant with wireless regulations around the world, including multiple non-standard channels. The working channel can be flexibly selected to ensure stable and reliable data transmission.

l         12-24 VDC Power input: non-standard POE power supply, 12-24 VDC

l         Industrial-grade design, suitable for harsh working environments such as vehicle and industrial robots

l         The device housing supports IP67 protection, and is equipped with L-shaped splints and U-shaped clamps.

l          Reliable communication distance 1-55KM (depending on different antennas).


General parameters :  

Main device

main chip

AR9344

RAM

64MB

FLASH

16MB

线 Wireless

WLAN standard

IEEE 802.11 a / n

Transmission mode

2x2 MIMO

Frequency Range

5.150-5.850 GHz

RF power

Up to 29dbm

Receive sensitivity

-97 ~ -75dbm (varies by modulation method)

Channel bandwidth

5,10,20,40MHZz

Modulation

802.11 a / n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)

Data rate

802.11 n: 300, 270, 240, 180, 120, 90, 60, 30 Mbps 802.11 a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Error correction

FEC, selective ARQ

Duplex mode

Time division duplex

线 Antenna

Types of

基站(2*2N型接口) Terminal (2 * 2SMA) base station (2 * 2N type interface)

Wired interface

interface

10/100 Base-T, RJ45

Firmware

Wireless mode

Base Station mode, CPE mode, P2P (Bridge) mode

wireless technology

Automatic channel selection, automatic modulation mode selection, automatic transmit power control (ATPC)

Wireless security

WPA / WPA2 personal encryption, WPA / WPA2 corporate encryption, WACL, user isolation

Wireless QOS

Queue first

Network mode

Bridging, IPv4 routing, IPv6 routing

network technology

No NAT routing, NAT routing, VLAN

WAN protocol

Static IP, DHCP client, PPPOE client

service

DHCP, SNMP, NTP client, traceroute, ping watchdog

management

HTTP (S) GUI, SSH, SNMP read, WNMS, Telnet

tool

Site survey, connection test, antenna calibration

Standard sizes

Size (850V1)

170 mm (length) × 95mm (width) × 28 mm (height)

weight

0.34Kg (terminal)

1.5Kg (base station)

installation

DIN rail or bracket installation

L-shaped splint and U-shaped clamp

Power supply

Device power

18-24V DC (non-standard POE power supply)

Power consumption

2.4-3.6 W

working environment

temperature

-40 ° C ~ + 65 ° C

humidity

0 ~ 90% (non-condensing)

 

RF characteristics:

Data Rate

TX

RX

11an HT20 / 40 MCS7

24/24/24

-70 / -67 / -64

11an HT20 / 40 MCS6

25/25/24

-71 / -68 / -65

11an HT20 / 40 MCS5

25/25/24

-72 / -69 / -66

11an HT20 / 40 MCS4

26/26/24

-76 / -73 / -70

11an HT20 / 40 MCS3

27/27/24

-80 / -77 / -74

11an HT20 / 40 MCS2

27/27/24

-83 / -80 / -77

11an HT20 / 40 MCS1

28/28/24

-85 / -82 / -79

11an HT20 / 40 MCS0

28/28/24

-88 / -85 / -82

11a 54M

25

-71

11a 48M

26

-72

11a 36M

27

-76

11a 24M

28

-80

11a 18M

28

-83

11a 12M

28

-85

11a 9M

28

-87

11a 6M

28

-88

 


龙博线上娱乐 和丰娱乐 新宝1娱乐 手机电玩平台